Your video doorbell is only useful when it's connected. Get a new router, switch internet providers, or move to a new house, and suddenly your doorbell can't send alerts or record anything, leaving your front door unmonitored. In moments like that, you must want to know how to change WiFi on video doorbell.
The process is usually simple. No special skills needed, and there’s rarely any need to take the doorbell apart. In most cases, a few taps in the app get everything connected again. Steps can look a little different by brand, so this guide covers the main methods used in many UK homes. Read on!
Why You Might Need to Change Wi-Fi on Your Video Doorbell
Most of the time, your video doorbell just runs in the background without any attention. But a few common situations will require you to update its network settings:
- You got a new router or switched ISP. New hardware means a new network name and password. Your doorbell won't automatically know the new credentials.
- You changed your Wi-Fi password. That’s a smart move for security, but every smart device now needs the new password, including the doorbell.
- Your signal is weak or unstable. If your doorbell keeps dropping offline, switching it to a less crowded Wi-Fi band or connecting to a closer extender can help.
- You moved the doorbell to a different door. A new location might be out of range of your main router, so you'll need to connect it to a nearer access point.
How to Change Wi-Fi on Popular Video Doorbell Brands
The process is mostly handled through the smartphone app. Below, we'll cover how to change Wifi on Ring video doorbell, Google Nest, eufy, and other common brands in the UK.
How to Change WiFi on eufy Video Doorbell
The eufy video doorbells are known for straightforward setup and local storage without subscription fees. To show how to change Wi-Fi on eufy models, we’ll use the video doorbell E340 as an example. It’s a popular pick with 2K resolution and a dual-camera design.
- Open the eufy Security app and find your doorbell.
- Tap the gear icon or three dots to open Settings.
- Go to General → Wi-Fi Connection.
- Select Change Wi-Fi and follow the prompts.
- If prompted, press and hold the Sync button on the doorbell until you hear a chime. That sound means the new connection is set.
Some eufy models connect through a HomeBase™, such as the video doorbell S330. In that case, update the Wi-Fi settings on the HomeBase™ instead. Once the HomeBase™ connects to the new network, the doorbell updates on its own.
How to Change Wi-Fi on Ring Video Doorbell
Ring is also a widely used video doorbell brand in the UK. It handles Wi-Fi changes through the "Device Health" section in the app. Here are the steps you can try, though results may vary depending on your model:
- Open the Ring app, tap the menu (≡), and select Devices.
- Choose your doorbell and tap Device Health.
- Select Change Wi-Fi Network or Reconnect to Wi-Fi.
- You'll need to be near the doorbell, and may need to press the Setup Button (usually behind the faceplate) to put it into pairing mode.
How to Change Wi-Fi on Google Nest Video Doorbell
On many Google Nest doorbells, Wi-Fi changes aren’t a simple “edit password” job. The Google Home app often won’t update Wi-Fi details, so the doorbell needs to be set up again from scratch. Here are the steps you can try, though they may not work for every model or firmware version:
- Factory reset the doorbell by holding the reset pin on the back.
- Remove the device from the Google Home app.
- Tap the + icon to "Set up device" and add it back as new, entering your new Wi-Fi details during setup.
Heads up: A factory reset may wipe your local video history, so save any important clips first.
The steps above are general guides based on official support documentation. The exact process may vary depending on your model or firmware version, but these are good starting points to try. If something doesn't work as expected, check your brand's support page for model-specific instructions.
How to Troubleshoot If Your Video Doorbell Won’t Connect
Sometimes the Wi-Fi name and password are correct, but the doorbell still won’t connect. When that happens, a few simple checks can often solve the problem.
- Check the frequency. Many doorbells only work on 2.4GHz Wi-Fi. If your router is set to 5GHz only, the doorbell won't even see the network.
- Power cycle the device. For wired models, flip the breaker off for 30 seconds. For battery models, pop the battery out and back in. This clears stuck network chips more often than you'd expect.
- Get closer to the router. During the initial Wi-Fi setup, bring your phone (and the doorbell, if it's battery-powered) as close to the router as possible. Once connected, move it back to the door.
- Update your app. An outdated app can struggle with newer router security protocols. Check the App Store or Google Play for updates before troubleshooting further.
Conclusion
Keeping your doorbell online matters more than most people think. A new router or password can break the connection fast, which is why knowing how to change Wifi on video doorbell is so useful. The steps are usually simple and handled in the app, even if they differ slightly by brand. A quick check after any network change helps keep alerts and recordings working as expected. If you prefer a doorbell with a smoother setup and local storage, eufy is a solid option to explore.
FAQs
How do I connect my doorbell to my new Wi-Fi?
To connect your doorbell to a new Wi-Fi network, you usually need to use the manufacturer's app. Navigate to the "Settings" or "Device Health" section of your specific doorbell. From there, look for a "Change Wi-Fi" or "Reconnect" option. You will likely need to be near the device to press a physical button that puts it into "Setup Mode" so it can scan for your new network name.
How do I change the Wi-Fi on my doorbell camera?
For most brands like eufy and Ring, you change the Wi-Fi by going into the app settings, selecting your device, and choosing the network settings option. You will enter your new SSID (network name) and password. If the app doesn't have this option, you may need to delete the device from the app and re-add it as a new installation.
How to reset your Ring Doorbell with new Wi-Fi?
If your Ring doorbell won't connect through the app's "Change Network" feature, you can perform a hard reset. Remove the faceplate and hold the orange setup button for 15-20 seconds. Once the light on the front starts flashing, open the Ring app and select "Set Up a Device." Follow the instructions to connect it to your new Wi-Fi signal from scratch.
How do I change the Wi-Fi connection on my Google doorbell?
Google Nest doorbells typically require you to remove the device from the Google Home app and perform a factory reset using the pinhole on the back. Once reset, you use the app to "Add Device" again. During this fresh setup, the app will ask you to select a Wi-Fi network, at which point you can provide the credentials for your new router.
How to connect doorbell camera to Wi-Fi?
Connecting a doorbell camera to Wi-Fi is usually done through the brand’s app. Download the app, create an account, and make sure your phone is on a 2.4GHz Wi-Fi network. Many doorbells won’t connect to 5GHz. In the app, choose Add Device and follow the on-screen steps. Scan the QR code on the doorbell if asked, then enter your Wi-Fi password. Keep the doorbell close to the router during setup for a stronger signal.
